|
AXYS Centrifugal Barrel
Finishing Machines
Phone, Fax or Email Rhodes Mktg for a Quote! 888-683-6180
The introduction of the CPC (Computerized Process Controller)
process consistency has been greatly improved by incorporating recipe
handling with the loading procedures. The CPC is capable of storing a
large amount of process information such as types and amounts for the
media and compounds, maximum number of parts per barrel, loading
instructions or procedures and cycle time and turret RPM. The operator
may chose from the preset process screen which process to run (either by
part description, part number, or process code). Then simply select
either to review operating procedures or run process. Once run have been
selected process parameters such as media and water levels, turret RPM
and cycle time are automatically loaded into the CPC memory and are
activated by a push of a button. The system is loaded and operated to
exact and consistent standards every cycle.
CPC1000 Centrifugal Barrel
| Maximum Capacity: |
1.0 cubic foot (28.31 L). |
| Available Barrels: |
0.25 cubic foot (7.08 L) or 0.10 cubic foot (2.83 L). |
| Capacity Distribution: |
Four cradles, each holding one 0.25 cubic foot barrel or two 0.10 cubic foot barrels. |
| CPC Interface: |
Touch-screen controls with recipe storage capabilities. |
| Main Drive: |
3 horsepower, three phase AC motor, inverter controlled. |
| Turret Speed Range: |
0-300 RPM fully adjustable. |
| Barrel Rotation Ratio: |
1:1 |
| Barrel Construction: |
304 Stainless steel with 65-durometer removable rubber lining. |
| Machine Enclosure: |
304 Stainless steel. |
| Power Requirements: |
208/230 (± 10%) VAC, 50/60Hz, 3Ø, 15A. |
| Compressed Air Required: |
None |
| Dry Floor Compatible: |
Yes |
| Country of Origin: |
USA |
| Warranty: |
One, two, & three year warranty, determined by component type. |
| Options: |
Extra barrels, workstation. |
CPC2500 Centrifugal Barrel
| Maximum Capacity: |
2.64 cubic foot (74.75L). |
| Available Barrels: |
1/3 cubic foot (actual 0.33, 9.34 L). |
| Capacity Distribution: |
Four cradles, each holding two-1/3 ft3, two-1/4
ft3 or four-1/8 ft3 barrels. |
| CPC Interface: |
Touch-screen controls with recipe storage capabilities. |
| Main Drive: |
7.5 horsepower, three phase AC motor, inverter controlled. |
| Turret Speed Range: |
0-300 RPM fully adjustable. |
| Barrel Rotation Ratio: |
1:1 |
| Barrel Construction: |
304 Stainless steel with 65-durometer removable rubber
lining. |
| Machine Enclosure: |
304 Stainless steel. |
| Power Requirements: |
208/230 (± 10%) VAC, 50/60Hz, 3Ø, 25A. |
| Compressed Air Required: |
None |
| Dry Floor Compatible: |
Yes |
| Country of Origin: |
USA |
| Warranty: |
Three (3) years / One (1) year
bearings, belts and linings. |
| Options: |
Extra barrels, workstation. |
CPC6000 Centrifugal Barrel
| Maximum Capacity: |
6.1 cubic foot (172.0 L) |
| Barrel Dimensions: |
1.52 cubic foot (43.0 L) |
| Capacity Distribution: |
Four cradles, each holding one 1.52 cubic foot barrel. |
| CPC Interface: |
Touch-screen controls with recipe storage capabilities. |
| Main Drive: |
20 horsepower, three phase AC motor, inverter controlled. |
| Turret Speed Range: |
0-200 RPM fully adjustable. |
| Barrel Rotation Ratio: |
1:1 |
| Barrel Construction: |
304 Stainless steel with 65-durometer removable rubber
lining. |
| Machine Enclosure: |
304 Stainless steel. |
| Power Requirements: |
460 (± 10%) VAC, 50/60Hz, 3Ø, 40A |
| Compressed Air Required: |
90psi |
| Dry Floor Compatible: |
Yes |
| Country of Origin: |
USA |
| Warranty: |
Three (3) years / One (1) year
bearings, belts and linings. |
| Options: |
Divided compartment conversion kit, additional separation
screens. |
CPC12000 Centrifugal Barrel
| Maximum Capacity: |
12.24 cubic foot (346.4L) |
| Available Barrels: |
3.06 cubic foot (86.6L) |
| Capacity Distribution: |
Four cradles, each holding one 3.06 cubic foot
barrel. |
| CPC Interface: |
Touch-screen controls with recipe storage capabilities. |
| Main Drive: |
30 horsepower, three phase AC motor, inverter controlled. |
| Turret Speed Range: |
0-200 RPM fully adjustable. |
| Barrel Rotation Ratio: |
1:1 |
| Barrel Construction: |
304 Stainless steel with 65-durometer removable rubber
lining. |
| Machine Enclosure: |
304 Stainless steel. |
| Power Requirements: |
460 (± 10%) VAC, 50/60Hz, 3Ø, 40A |
| Compressed Air Required: |
90psi |
| Dry Floor Compatible: |
Yes |
| Country of Origin: |
USA |
| Warranty: |
Three (3) years / One (1) year
bearings, belts and linings. |
| Options: |
Divided compartment conversion kit, additional
separation screens. |
|
