Model MD36-144G Almco Gas-fired Parts Drying Machine

Features:  Rotary drum dryer designed to remove moisture from parts by immersing them in heated, dry maize. The overall drum length is 142” with a 36” diameter inner Helix that forces the parts to the discharge end of the machine. It is a gas fired and in as new condition.

$21,800

Several Spindle Finishing Machines Available

• Model 2SF36 Almco Spindle Type Finishing Machine
• Model 2SF36RA Almco Spindle Type Finishing Machine
• Model 1SF48 Almco Spindle Type Finishing Machine
• Model 2SF48D Almco Deep Tub Spindle Type Finishing Machine
• Model 2SF48 Almco Spindle Type Finishing Machines
• Model 2SF48BRA Almco Spindle Type Finishing Machines
• Model CFT-2000-1 Almco/Sutton Spindle Type Finishing machine

Call 888-683-6180 for info and pricing

Vibra Hone CB30

Features:  Shows very little use. Sold new this machine is $16,795.

$9,995

Tipton HS – R30 X

Features:  Centrifugal barrel machine in very good condition. Relined barrels and lids.

$7,995

1 Cubic Feet Used Gyromatic Deburring Machine, Model HZ30

Features:  Total Volume:1 CU. FT., Barrel Dimensions:11 3/4" x 3 1/2" x 6", Barrel Speed (Variable):30-250 RPM, Dimensions (L x W x H):50" x 40" x 48", Weight:1,200 LBS

Equipped with:  (4) Barrels, Variable Frequency Control, Cycle Timer, Jog Button, Horsepower: 3

$2,500

Dreher FT 4/20 Centrifugal Barrel Finisher

Features:  4 Barrels 7"x7" ea 230 volt.
Please call for more information.

Now only $3,995!
(was $4,995 -- $1,000 savings)

Heavy Duty, 4 Barrel Finishing Machine

Features:  Barrel size is 10 1/2W X 12D X 28L ID" Machine foot print is 120W X 45D W 152H" Heavy Duty Machine can run eight 12" ring gears at a time.

$39,999

JUST IN!

Tipton EFF-105 High Energy Centrifugal Disc Machine

Features:

• Urethane Lined 105 Liter Processing Bowl
• Clearance Control Gap to Maintain Critical Gap Integrity
• Motorized Bowl Dump Feature for Quick Change Over
• 5 Hp Main Drive Motor With Positive Locking Brake
• Variable Speed Drive for Increased Finishing Options
• Direct Drive for Less Maintenance
• Easy to Operate Control Panel with Process Timer
• Integrated Compound Metering Pump

$5,995

Rotofinish Model Rm-2p Centrifugal

Features:  2 Cu Ft Capacity, 25-1/2" Diameter Bowl, Power Dump, Power Separation Screen, Media Classifier, 5 Hp Main Motor, Process Timer, Control Panel With Disconnect, 440 Volt, Your Choice Screen Size, Your Choice Classifier Screen Size, Serial Number Rm2p-89-B10, New 1989, Floor Space 54" L-R X 63" F-B,18" Riser Can Be Removed, Weight Approx 3,000 Lbs

* Will Be Cleaned, Checked Out And Test Run Prior To Shipment

Now only $14,995!
(was $19,995 -- $5,000 savings)

Tipton disc EFF – 40

Features:  High energy centrifugal disc with screen separator system with only 230 hours.

$9,500

OTEC Model DF-70 Precision Drag Finishing Machine

Features:  230V/3PH/50-60HZ, Built 1999, Work piece holders: 5, Solid aluminum frame, Octagonal stainless steel process containers, Frequency converter speed control, Power consumption: 2.0 KVA, Motor: 1.5 KW, 1750 RPM, Machine dimensions: 1170(w) x 1100(d) x 1850(h) mm (46" x 43" x 73"high), Estimated weight: 265 kg ( 583 lbs.)

Equipped with: (7) extra baskets, On board control, Timer, Condition: excellent

$14,900 w/tooling

OTEC Model DF-140 Precision Drag Finishing Machine

Features:  400V/3PH/50-60HZ, Built 2001, Work piece holders: 10, Solid aluminum frame, Octagonal stainless steel process containers, Frequency converter speed control, Power consumption: 5.0 & 7.0 KVA, Motor: 2.2 KW, Machine dimensions: 1650(w) x 1300(d) x 2380(h) mm (65" x 51" x 94"high), Estimated weight: 550 kg ( 1210 lbs.)

Equipped with: (10) extra baskets, Computerized control unit, Timer, Condition: excellent

$32,900 w/loads of tooling

Filter King Filtration System

The Economy Batch Unit is a low price alternative to other wastewater treatment systems available.

Each utilizes a mix chamber with 1/3 hp mixer where the FloccinAgent™ is added and mixed with the wastewater, then the mixer is turned off and the drain valve is opened allowing the flocculated water to drain and dewater in the filter bag below the Mix Tank. The solids in the filter bag are allowed to drain and dry over time for easy disposal. Dewatering 50 gallons takes about 30 minutes (depends on specific water treated). Dewatering Bags can be used many times before disposal and are easily removed from the roll-away container.

Features: 60 gal, with stainless steel frame

60 gallon unit sold new for $2,995.00

Please Check Back Soon!

Dreher Model VT-5/VT, 5-Barrel Horizontal Tumbling/Finishing Machine

Features:  220V/3PH/50-60HZ Built 1994 Barrel volume: 22 liters per barrel Barrel speed: 16 - 26 RPM Motor: 3/4 HP Timer range: 24/100 Hr. Overall dimensions: 12-1/2' x 4-1/3' x 3-1/2' High. Estimated Weight: 1400 lbs

Equipped with:  Single & Multiple compartment barrels, Media/parts unloader separator with rinse station, Variable speed drive, Cycle timer, 4 barrels total:

• 2 - single 15 1/2" by 4" opening 9" depth 18" width
• 1 - 4 compartment 3 3/4" by 3 3/4" openings 9" depth 3 3/4" width
• 1 - double compartment 6" by 4" opening 9" depth 9" width

$6,999

Dreher Model VT-5/VT, 5-Barrel Horizontal Tumbling/Finishing Machine

Features:  220V/3PH/50-60HZ Built 1986 Barrel volume: 45 liters per barrel Barrel speed: 16 - 26 RPM Motor: 3/4 HP Timer range: 24/100 Hr. Overall dimensions: 12-1/2' x 4-1/3' x 3-1/2' High

Equipped with:  Single & Multiple compartment barrels, Media/parts unloader separator with rinse station, Variable speed drive, Cycle timer

$8,950

Dreher Model VT1-VT Rotary Barrel Tumbler

Features:  220-380V/3PH/60HZ Built 1985 Barrel size: 19" x 9", hex shape, 3-compartments Overall size: 34" x 30" x 52" high Estimated weight: 440 lbs.

Equipped with:  Variable speed Emergency stop (1) polypropylene barrel

$2,900

Dreher Barrel Finishing Machine VT5/VT 60"K

Features: Total Volume 4.8 Cubic Feet, Barrel Dimensions (5) 10"x 20", Tumbling Speed (Variable) 16-36 RPM, Dimensions (WxDxH) 149" x 36" x 98", Weight 1400 LBS

Equipped With:  10-Barrels with 2 Compartments Each, Powered Barrel & Shot Lift, Cycle Timer (0-99 Hours), 1 1/2 H.P Motor

Now only $7,500!
(was $9,500 -- $2,000 savings)

Sweco Model FM1.2C Vibratory Bowl Finishing Machine

Features:  230V/3PH/60HZ, Capacity: 1.2 cubic feet, Maximum straight part length: 9", Motor: 1/3 HP, Bowl: all cast polyurethane elastomer, Bowl diameter: 24", Channel width: 5-1/4", Channel depth: 5-1/4", Dimensions: 24" diameter x 24" high, Estimated weight: 210 lbs.

Equipped With: Drain and Discharge chute

$2,495

Lanco Corp 1.5 cu ft Vibratory Bowl

Features: 1.5 cu ft capacity, 1.5 HP, 230/460 volts, 1725 RPM, phase 3.00, weight 450 lbs

$2,995

Roto Finish ER 0405 Vibratory Finisher

Features:  5 cu ft capacity, 10" channel, internal separation, manual gate, 3 hp motor, automatic recirculating oil lubrication with lube failure auto shutdown, control panel with disconnect, compound nozzles, sediment tank, overall diameter 48", approximate weight 3,000 lbs, your choice voltage, your choice screen size, good condition.

$8,995

Rotofinish Model ST-3 Batch Vibratory Finishing Mill

Features:  230V/3PH/60HZ, Capacity: 3 cubic feet, Load capacity: approximately 800 lbs., Bowl width: 34", Channel width: 10", Channel depth: 8-1/2", Maximum straight part: 12", Overall height: 52", Estimated machine weight: 600 lbs

Equipped With: Ribbed polyurethane lining, Rounded walls, Discharge chute

$4,500

Raytech, 16″ Vibratory Finishing Machine, Model Adjustavibe FT75

Features:  250V/1PH/50HZ, Year of mfg: 1990, Capacity: 3/4 cubic foot, Channel width: 6-1/2", Channel depth: 8", Bowl width: 17", Drain: 1/2" hole, Estimated weight: 70 lbs., Overall size: 21" x 21" x 27" high

$795

Mirro Brite Model 100AA Vibratory Finishing Machine

Features:  115V/1PH/60HZ, Work capacity: .67 cubic feet, Bowl diameter: 15-1/2", Channel width: 5", Channel depth: 6", Bowl height: 29-1/2", Stand: 16" x 17", Dimensions: 16" x 17" x 29-1/2" high, Motor: 1/2 HP

Equipped With: Chute, Drain

$1,400

Roto-Finish S-1506 Vibratory Bowl

Features:  22 Cubic Ft Capacity. Control panel with SLC 500 Allen-Bradley programmable controller. Liner in good shape but has been patched. Similar new $38,000.  Approximate Weight 6250 lbs

$16,975 

Roto Finish ST-20LRBCP Vibratory Bowl

Features:  20 Cubic Ft Capacity, Has Control Panel w/Timer, Pneumatic Operated Discharge Gate w/ Manual Valve, Media Separation Screen, LMI Metering Pump, 117"Diameter x 95"H, Approximate Weight 10500 lbs

$14,750

Almco R-10C 9 cu ft Vibratory Finishing Mill

Features:  Bowl Capacity: 9 Cubic Feet, Bowl Dimensions: Width:13" Depth:12", Frequency:1,400 VPM, Discharge Door: 14" x 8", Max. Load Capacity: 2,500 Lbs., Dimensions (L x W x H): 60" x 60" x50", Weight:2,000 Lbs.

Equipped with:  Stand alone control cabinet, timer, 5 horsepower

$7,950

Roto-Finish MPC-120-6-2 Multi Pass Combo Vibratory Finishing Machine

Features:  Bowl Capacity 18 Cubic Feet,
Process Channel Dimensions:  Number of Channels 5, Width 6" Depth 8",
Dryer Channel Dimensions: Width 6" Depth 8"
Drain Size (3) 6",Overall Diameter 136", Height 82", Weight 15,000 lbs., Location So. El Monte, CA

Equipped With:  TUC Digital Controller, 10" Parts Loading Conveyor, Compound Pump, Heater For Cobb Type Dryer, Parts Separator Gates On Process & Dryer Channels, Process & Unload Timer, Auto Lube System, 10,539 Hours on Meter, Horsepower 20.

$59,500

Sweco Vibratory Finishing Machine FM- 10- 3

Features:  Bowl Capacity 10 Cubic Feet, Bowl Dimensions:  Width 13" Depth 15", Max. Straight Part Length 24", Max. Load Capacity 3,000 LBS, RPM 1,200, Weight 1,200 LBS

Equipped With:  Slurry Pump & Tank, Horsepower: 2 1/2

$8,000

1 NEW Walter-Trowal Model CD 110 Bowl Vibrator

Features: internal separation with extended screen deck, 2.5 cu ft capacity, 36" diameter with 9" trough, polyurethane lining with discharge door, floor space 42" wide x 55" deep x 40" high, shipping weight 700 lbs, excellent condition.

$9,350

Sweco Model FMD-20HA

Features: 20 cu.ft. capacity, Control panel/ Process timer, Auto Lube

$14,500

Model OR 3 Almco Round Bowl Type Finishing Machine

Features:  2-1/2 cubic Ft. working capacity. Excellent condition.

$5,200

Model OR-10 Almco Round Bowl Type Finishing Machine

Features:  9 cubic ft. working capacity. We have 7 available with variable speed drive or constant speed option, for gentle finishing or aggressive deburring. Condition ranges from very good to like new from $5,200 to $11,400.

$5,200 to $11,400

Model OR-20V Almco Round Bowl Type Finishing Machine

Features:  20 cubic ft. working capacity, in as new condition.

$15,400

Almco PV-1 Vibratory Tub

Features:  1 cubic foot. Tub dimensions: 8.5"L x 13"W x 12"D.

$975

5 Cu. Ft. Used Automated Finishing AV-5 Vibratory Tub

Features:  Tub Capacity: 5 Cubic Feet, Tub Inside Dimensions: Length: 36" Depth: 14" Width: 12", Discharge Door: 5", Outside Dimensions (L x W x H): 70" x 28" x 35", Weight: 1,500LBS

Equipped with:  Slurry Pump, Controls With Timer, Variable A/C Control, Horsepower: 2

$3,495

8.5 cu ft Burr King Vibra King 85 Vibratory Tub

Features:  Capacity 8.5 cu ft, Dump Chute Diameter 5", Max Part Girth 15", Max Part Length 36", Inside Tub Dimensions 37" x 20" x 20" D, Max Part Load 450 lbs, Main Motor 3HP / 440 V / 3 PH / 60 HZ, Vibratory Frequency 2000 HZ, Age 2005.

Equipped with:  Burr King Filter Pak 8000, Adjustable Amplitude, Fluid Pump, In Plant, Under Power

$9,950

Timesaver V-44 Vibratory Deburring Machine

Features:  Tub Capacity 44 Cubic Feet, Tub Dimensions: Length 142" Width 20" Depth 20", Power Unit Speed (Variable) 900-2000 RPM, Dimensions (L x W x H) 192" x 38" x 68", Weight 4500 LBS.

Equipped With:  Slurry System, Auto Lube System, Horsepower: 20

$24,500

Roto-Finish Spiratron, Model ST-50BSA

Features:  53.9 Cubic Ft. capacity with rotating dividers, 17-3/4” Tub width, 18” Tub depth, Roto-Thane lining thickness ¾”, Motor model RFV-40-BD746, 20 HP, Oil recirculation system, Constant Flow solution system, Controls, Overall dimensions 146” x 156”, 12,000 lbs, good condition.

$22,600

Model VB1615 Almco Tub Finishing Machine

Features:  2.5 cubic ft. working capacity, 46” x 23-1/2” x 29-5/8” deep Tub, 1750 to 2500 VPM adjustable Vibration Frequency. Like New. 

$4,200

Model V7 Almco End Discharge Type Finishing Machines

Features:  6.1 cubic ft. capacity, 31” x 17” tub size, with a 5HP variable speed drive motor. There are 3 available all in excellent condition from $5,700 to $6,400.

$5,700 to $6,400

Model V17DT Almco End Discharge Type Finishing Machine

Features:  18 cubic ft. capacity, 46” x 23-1/2” x 29-5/8” Deep Tub with Sound Hood and Auto Lube, Excellent Condition. 

$15,700